Strait-Flex® Head Patch
Pre-cut to fit standard sprinkler head safety caps.
What is it for?
Pre-cut to fit standard sprinkler head safety caps and PVC pipes, Head-Patch will not sag on large ceiling mis-cuts. Head-Patch will not fuzz-up during sanding.
- Pre-cut to fit standard sprinkler head safety caps
- Repairs and reinforces mis-cut or damaged areas around sprinkler head holes
- Install in areas where patching cutouts were made too large
- Sprinkler head replacement patch
How to Install
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4" thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand.
- Compound that remains on backside of Head-Patch makes patch very rigid in the damaged area.
- REPAIRS OVER PAINTED SURFACES - recommend the use of Strait-Flex Super-Bond mixed with all-purpose joint compound to enhance bondability.
Want to try it for yourself?
Reach out to one of our trusted local partners
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.