Strait-Flex® Head Patch

Pre-cut to fit standard sprinkler head safety caps and PVC pipes, Head-Patch will not sag on large ceiling mis-cuts. Head-Patch will not fuzz-up during sanding.

• Pre-cut to fit standard sprinkler head safety caps
• Repairs and reinforces mis-cut or damaged areas around sprinkler head holes
• Install in areas where patching cutouts were made too large
• Sprinkler head replacement patch

• To apply, lightly sand area to be repaired.
• Apply drywall compound 1/8”-1/4" thick directly to back of patch.
• Place patch over center of repair and wipe down flat to wall using joint knife.
• Immediately skim-coat patch and let dry.
• Apply second coat, let dry, and sand.
• Compound that remains on backside of Head-Patch makes patch very rigid in the damaged area.
• REPAIRS OVER PAINTED SURFACES - recommend the use of Strait-Flex Super-Bond mixed with all-purpose joint compound to enhance bondability.