What is it for?
Butt-Tape is twice as fast as conventional tapes and two times stronger than paper or mesh tape. No compound required over laminated area of tape - just skim coat edges. Apprentices and professional tapers can achieve the flattest butt-joints possible. Leaves butt-joints virtually non-noticable.
- Vertical and horizontal butt-joints
- Commercial "Top-Out" applications
- 50% less compound. 50% less sanding. 50% faster drying time.
- Cracked butt-joints and stress cracks.
- No pre-filling required, no delayed shrinkage.
- No beading or paint blisters
How to Install
To watch install video - Click Here
- Apply all-purpose joint compound to butt-joint with a 5” or 6” taping knife. Press Butt-Tape into wet compound by hand. Adjust center line of tape to center over joint.
- Wipe down edges. Immediately apply a coat of compound with an 8” or 10” taping knife to each edge of Butt-Tape. Let dry.
- Apply second coat with 10” or 12” taping knife to each edge of Butt-Tape. Let dry and sand.
Want to try it for yourself?
Reach out to one of our trusted local partners.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.